Water Sentinel WSF-1 Refrigerator Water Filter

Price: $25.99
Availability: Out of stock
Fits Frigidaire and Kenmore refrigerators where the filter is inside of a round plastic housing
Choose a quantity
  • 1 Filter $25.99  
  • 2 Filters Price: $25.29 each
  • 3 Filters Price: $24.49 each
  • Made in the USA
  • Ensures contaminants and impurities never reach your glass!
See more product details
Designed as a comparable replacement for Frigidaire and Kenmore fridge models that use the WFCB or WF1CB, the Water Sentinel WSF-1 refrigerator water filter provides great tasting water for up to six months! Immediately after a quick and easy installation, this filter will begin to significantly reduce impurities that can cause quality issues in your drinking water, including chlorine and sediment. Proudly made in the USA.
Package Qty 1
Used In Brands Frigidaire, Kenmore
Manufacturer's Id WSF-1
UPC 718122037575
Actual Size (in) 4 1/8 inches (length) x 1 7/8 inches (outside diameter)
Actual Size (cm) 10.48 x 4.7625
Media Carbon Block
Primary Filter Media Activated Carbon Block
Filter Life (gallons) 300
Filter Life (liters) 1,135.62
Filter Life (months) 6 months
Operating Pressure (psi) 30 - 100
Operating Temperature (°F) 33 - 100
Operating Temperature (°C) 0.6 - 37.8
Flow Rate (gpm) 0.5
Flow Rate (lpm) 1.893
Warranty Guarantee Unconditional 90 day money back guarantee
Includes Filter Cartridge, Installation Instructions, O-Ring, Silicone O-Ring Lubricant

Reduced Contaminants

The WATERSENTINEL-WSF-1 reduces the following contaminants:

  • Bad Taste and Odor
  • Chlorine Taste & Odor
  • Fluoride NF
  • Sediment

The WATERSENTINEL-WSF-1 is comparable with the following part numbers

9906 9910 469906 469910
218657600 218657701 218710901 218710902
218717805 218732306 218904501 218904602
218907800 218994101 240389101 240389102
240394501 4609906000 4609910000 5303917752
5303917836 5303917937 5303918017 46-9906
46-9910 9906P 9910P AP2591529
FRRF-100 NGRG-100 NGRG2000 NGRG-2000
PS503627 PS898866 RC101 RC-101
RC200 RC-200 RC900 RC-900
RF100 RF-100 RF200 RF-200


  1. Unscrew the filter cup and dump out the water
  2. Pull the old filter straight down and discard
  3. Place the new filter in the filter cup
  4. The end of the filter with the small o-ring should be up
  5. Screw the filter cup (with filter) up onto the housing
  6. The filter will self-align as the cup is tightened
  7. Reset your 'change filter' light (if your fridge has one)

Reset Instructions

  1. Press and hold the reset button on the dispenser until the green light flashes (up to 15 seconds)