Water Sentinel WSA-1 Refrigerator Water Filter

Price: $41.99
Availability: In stock
Only 2 left
Fits Amana and Kenmore refrigerators with a round, screw-in filter located inside the refrigerator compartment above the top shelf
Choose a quantity
  • 1 Filter $41.99  
  • 2 Filters Price: $40.79 each
  • 3 Filters Price: $39.49 each
  • Ships fast!
  • Reduces chlorine, sediment, bad taste and odor
  • Keeps water quality high for up to six months!
See more product details
Built to fit Amana and Kenmore fridge models that use the Amana 12527304, the Water Sentinel WSA-1 refrigerator water filter is a comparable replacement that provides the same great tasting water at a great looking price! For up to six months after a painless installation, this filter will significantly reduce bad taste and odor, plus sediment and chlorine, from your drinking water. Proudly made in the USA. Order the Water Sentinel WSA-1 refrigerator water filter today.
Package Qty 1
Used In Brands Amana, Kenmore
Manufacturer's Id WSA-1
UPC 718122037773
Actual Size (in) 5 3/4 inches (length) x 3 5/8 inches (outside diameter)
Actual Size (cm) 14.61 x 9.2075
Media Carbon Block
Primary Filter Media Activated Carbon Block
Filter Life (gallons) 300
Filter Life (liters) 1,135.62
Filter Life (months) 6 months
Operating Pressure (psi) 30 - 100
Operating Temperature (°F) 33 - 100
Operating Temperature (°C) 0.6 - 37.8
Flow Rate (gpm) 0.5
Flow Rate (lpm) 1.893
Warranty Guarantee Unconditional 90 day money back guarantee

Reduced Contaminants

The WATERSENTINEL-WSA-1 reduces the following contaminants:

  • Bad Taste and Odor
  • Chlorine Taste & Odor
  • Fluoride NF
  • Sediment

The WATERSENTINEL-WSA-1 is comparable with the following part numbers

09014P 09904P 111506 12319801
12388401 12388402 12388403 12388406
12388407 12527301 12527302 12527303
12527304 12527305 12527307 12527309
12527504 146-9014 4609014000 4609904000
46-9014 46-9904 46-9904P 469014
469904 469904P 67003634 9014
9014P 9904 9904P AP4310541
PD00005730 PS1965106 RWF-1090 RWF1090
SGF-G9 WF-292 WF-30 WF-40
WF-401 WF-4010 WF-401P WF-401S
WF-401T WF292 WF30 WF40
WF401 WF4010 WF401P WF401S


  1. Twist the old filter a quarter-turn counterclockwise
  2. Pull the filter straight down and discard (don't worry, the water will shut off automatically)
  3. Push the new filter up into the fridge until it stops
  4. Twist the filter a quarter-turn clockwise
  5. Reset your 'change filter' light (if your fridge has one)

Reset Instructions

  1. Press and hold the dispenser LOCK and AUTO-LIGHT (or WATER on some fridges) buttons on the dispenser at the same time for 4 seconds or until the filter status indicator begins to flash, then release the buttons