Pleated 10 inch x 2.5 inch Sediment Water Filter by Tier1 (1 Micron)

SKU
TIER1-SPC-25-1001
Price: $7.99
Availability: In Stock
  • Made of a durable pleated polyester material
  • The pleats allow you to wash off at least once
  • Greater dirt holding capacity
  • Includes a polypropylene core for added strength
See more product details
The pleated 10-inch x 2.5-inch sediment water filter by Tier1 (1 Micron), is both chemical and bacteria resistant. The pleated material of the filter makes this filter washable and reusable. Due to the superb dirt holding capacity, you can wait longer before filter changes eliminating hassle. Even use this filter in almost every kind of application including commercial, residential, and industrial. You can't go wrong with the plastisol fuses that add superior strength to the plastic filter ends. This is the best aftermarket brand out there, willing to outcompete even the OEM brand filters. Order this great quality aftermarket filter today!

Experience the Tier1 Difference

Tier1 manufactures high-quality filtration and household products. We take creating and maintaining a healthy home seriously. Products must undergo rigorous testing and meet demanding quality expectations in order to earn the Tier1 badge. Every purchase is backed by the Tier1® Guarantee:

  • Guaranteed Fit
  • Guaranteed Quality
  • Guaranteed Price
Package Qty 1
Used In Brands Hydronix, Pentek, Tier1
Manufacturer's Id SPC-25-1001
UPC 641945742268
Advertised Size (in) 10 x 2-1/2
Actual Size (in) 9 7/8 inches (length) x 2 1/2 inches (outside diameter)
Actual Size (cm) 25.0825 x 6.35
Media Non-Woven Pleated Polyester
Filter Life (months) 6 months
Micron Rating (Nominal) 1
Operating Temperature (°F) 40 - 125
Operating Temperature (°C) 4.4 - 51.7
Flow Rate (gpm) 4
Flow Rate (lpm) 15.12
Color White
Materials of Construction Core: Polypropylene, End Caps: Vinyl Plastisol
Warranty Guarantee Unconditional Guarantee for Life of the Product

Reduced Contaminants

The TIER1-SPC-25-1001 reduces the following contaminants:

  • Dirt
  • Particulates
  • Sand
  • Sediment
  • Silt

The TIER1-SPC-25-1001 is comparable with the following part numbers

HYDRONIX-SPC-25-1001
SPC-25-1001
SDF-25-1001
255481-43
FM-1-975

Instructions

  1. Turn off water supply. Press red pressure-relief button (if present)
  2. Unscrew housing. Remove large o-ring, wipe clean and set aside
  3. Discard used filter cartridge
  4. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly
  5. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
  6. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
  7. NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
  8. Insert new filter cartridge
  9. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
  10. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation

Reset Instructions