Samsung DA29-00012B Aqua Pure Plus Refrigerator Water Filter

Price: $59.99
Availability: Out of stock
Fits Samsung refrigerators with a long skinny filter mounted in the ceiling of the fridge, and replaces the A model which was recently discontinued
Choose a quantity
  • 1 Filter $59.99  
  • 2 Filters Price: $58.99 each
  • 3 Filters Price: $57.99 each
  • Ensures water quality remains high for up to six months after installation!
  • Meets or exceeds NSF/ANSI Standard 42
See more product details
For up to six months, the Samsung DA29-00012B Aqua Pure Plus refrigerator water filter will significantly reduce chlorine and particulates from making it into your drinking water. Easy to install, this genuine OE part will ensure the drinking water and ice from your Samsung fridge, and anything you mix up with this water, tastes crisp and clean.
Package Qty 1
Used In Brands Samsung
Manufacturer's Id DA29-00012B
UPC 036725520011
Actual Size (in) 11 1/2 inches (length) x 2 inches (outside diameter)
Actual Size (cm) 29.21 x 5.08
Media Carbon Block
Primary Filter Media Activated Carbon Block
Filter Life (gallons) 300
Filter Life (liters) 1,135.62
Filter Life (months) 6 months
Micron Rating (Nominal) 0⋅05
Operating Pressure (psi) 30 - 125
Operating Temperature (°F) 33 - 100
Operating Temperature (°C) 0.6 - 37.8
Flow Rate (gpm) 0.75
Flow Rate (lpm) 2.839

Reduced Contaminants

The SAMSUNG-DA29-00012B reduces the following contaminants:

  • Fluoride NF

The SAMSUNG-DA29-00012B is comparable with the following part numbers

DA2900012B DA29-00012B
WD-DA29-00012A WD-DA29-00012B
RWF1120 TIER1-RWF1120

The SAMSUNG-DA29-00012B fits the following model numbers



  1. Open 'flip-up' door
  2. Push filter cartridge straight in until you hear a 'click' - this releases the latch and allows the filter to be removed
  3. Pull the filter straight out and discard (don't worry, the water will shut off automatically)
  4. Push the new filter straight into the fridge until it 'clicks' into place
  5. Run the dispenser for 5 minutes to flush the system and purge all of the air from the new filter - then discard that water
  6. Reset your 'change filter' light (if your fridge has one)

Reset Instructions

  1. Press and hold the reset button for 3 seconds - the light should turn green