P5 Pentek Comparable Whole House Replacement Sediment Filter Cartridge by Tier1

SKU
TIER1-P5-10
Price: $3.29
Availability: In stock
Fits into most industry standard 10-inch water filtration system housings
  • Provides safe and pure water
  • Filters virtually all sediment, 5 micron or larger
  • Manufactured for performance, priced for value
  • Ensures you serve only the highest quality water, all throughout your home!
See more product details
The P5 Pentek Comparable Whole House Replacement Sediment Filter Cartridge by Tier1 is manufactured for use in housings that require 10 x 2.5 inch filter cartridges. Tier1 water filters confidently reduce virtually all impurities, 5 micron or larger, from your water. Offered here at a price making it easy to stock up, this filter represents one of the most affordable ways to ensure you serve only the highest quality water in your home. Tier1 water filters are manufactured for performance and priced for value. Stock up on the affordably priced sediment filters you need by adding the P5 Pentek Comparable Whole House Replacement Sediment Filter Cartridge by Tier1 to your cart today!

Experience the Tier1 Difference

Tier1 manufactures high-quality filtration and household products. We take creating and maintaining a healthy home seriously. Products must undergo rigorous testing and meet demanding quality expectations in order to earn the Tier1 badge. Every purchase is backed by the Tier1® Guarantee:

  • Guaranteed Fit
  • Guaranteed Quality
  • Guaranteed Price
Package Qty 1
Used In Brands Fulflo, Pentek, Tier1, Whirlpool
Manufacturer's Id P5-10
UPC 799932624926
Advertised Size (in) 10 x 2-1/2
Actual Size (in) 9 7/8 inches (length) x 2 1/2 inches (outside diameter)
Actual Size (cm) 25.0825 x 6.35
Media Spun Wound Polypropylene
Primary Filter Media Polypropylene
Filter Life (gallons) 8,000
Filter Life (liters) 30,283.3
Filter Life (months) 6 months
Micron Rating (Nominal) 5
Operating Temperature (°F) 40 - 145
Operating Temperature (°C) 4.4 - 62.8
Flow Rate (gpm) 5
Flow Rate (lpm) 18.927
Color White
Warranty Guarantee Unconditional Product Guarantee for Life of the Product
Includes One 10 X 2.5 Inch Spun Wound Polypropylene Replacement Filter by Tier1
Primary Filter Media Polypropylene

Reduced Contaminants

The TIER1-P5-10 reduces the following contaminants:

  • Dirt
  • Rust and Corrosion
  • Sand
  • Sediment
  • Silt

The TIER1-P5-10 is comparable with the following part numbers

9547 9577 9591 9747
12461 13110 17367 45331
57820 173884 1019128 1227867
155014-131 155014-43 155014-52 529-286
55410-14 55410-15 55410-16 Ace 45331
American Plumber 155014 American Plumber W5P Ametek 583228 Ametek P5
AP110 Flotec RS3 FXUSC FXWPC
FXWSC FXWTC GE FXUSC GE FXWPC
GE FXWSC GE FXWTC GE GXWH01C GE GXWH04F
GE GXWH08C GE GXWH20F GXWH01C GXWH04F
GXWH08C GXWH20F HF-150 HF-160
HF-360 Honeywell RF-60 K00173 Kenmore 38480
Kleen Plus P5 Master Plumber 583328 P5 P5-D
Pentek P5 PS220410 Sears 34362 TIER1-P5-10
True Value 529-286 US Filter P5 W25P W34-PR
W5P W5P W5P478 WaterPik IR-20
WC34-PR WHCF-DWHV WHCF-GD05 Whirlpool WHKF-GD05
WHKF-DWHV WHKF-GD05 WVC34 AP3416588
P5-10 TIER1-P5-10

The TIER1-P5-10 fits the following model numbers

3G-STANDARD-34-PR10
150574
All 10 x 2.5 inch filter housings

Instructions

  1. Turn off water supply. Press red pressure-relief button (if present)
  2. Unscrew housing. Remove large o-ring, wipe clean and set aside
  3. Discard used filter cartridge
  4. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly
  5. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
  6. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
  7. NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
  8. Insert new filter cartridge
  9. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
  10. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation

Reset Instructions