We use cookies to make your experience better.
Omnipure Q5515 Water Filter
SKU
OMNIPURE-Q5515
$25.99 List Price $36.99 Save 29%
Availability: In Stock
- Ships fast!
- Lasts up to 12 months after installation
- Reduces chlorine, lead, cysts, bad taste and odor
This genuine OE part, made in the USA, will reduce foul taste and odor from your drinking water for up to 12 months. By reducing chlorine, lead, cysts and other potentially harmful impurities, this filter will transform your water into a premium tasting beverage! Order the Omnipure Q5515 water filter by 4pm CST and we
Package Qty | 1 |
---|---|
Used In Brands | Omnipure |
Manufacturer's Id | Q5515 |
UPC | 799932588662 |
Advertised Size (in) | 10 x 2-1/2 |
Actual Size (in) | 10 inches (length) x 2 1/2 inches (outside diameter) |
Actual Size (cm) | 25.4 x 6.35 |
Media | Carbon Block with Lead Specific Media |
Primary Filter Media | Activated Carbon Block |
Filter Life (gallons) | 1,250 |
Filter Life (liters) | 4,731.76 |
Filter Life (months) | 12 months |
Micron Rating (Nominal) | 1 |
Maximum Operating Pressure (psi) | 125 |
Operating Temperature (°F) | 35 - 100 |
Operating Temperature (°C) | 1.7 - 37.8 |
Flow Rate (gpm) | 0.5 |
Flow Rate (lpm) | 1.893 |
Additional Information | Fitting Size: This Q-Series filter is a replacement filter and must be used with an existing Q-Series head |
Reduced Contaminants
The OMNIPURE-Q5515 reduces the following contaminants:
- Bad Taste and Odor
- Chlorine Taste & Odor
- Cysts
- Lead
The OMNIPURE-Q5515 is comparable with the following part numbers
Q5515 | |
Q5515P | |
Q5515-P |
Instructions
- Omnipure Q5515 water filters should be installed on cold water lines only
- Omnipure Q5515 water filters should not be used where the water is microbiologically unsafe
- Each time you change your filter, clean and apply silicone food grade lubricant (such as OR-LUBRICANT-LG or OR-LUBRICANT-SM) generously to both the small and large o-ring in the Q-Series Head
- It is recommended that you replace the Omnipure H-118 O-Ring every time you change your filter
- The H-118 O-Ring is the larger of the two o-rings in the Q-Series Head System
- If you do not replace the H-118 O-Ring, you may experience leaking because the o-ring adjusts to the shape of the old filter, which may be slightly different than the new filter
- The Omnipure H-011 O-Ring is the smaller o-ring in the Q-Series Head