We use cookies to make your experience better.
Omnipure Q5505 Water Filter
SKU
OMNIPURE-Q5505
Price:$20.99 List Price Price:$29.99 Save 30%
Availability: In Stock
- Ships fast!
- Lasts up to 12 months after installation
- Reduces chlorine, sediment, bad taste and odor
For up to 12 months or 3,000 gallons, the Omnipure Q5505 water filter will reduce contaminants, ranging from chlorine to sediment, that can impact the flavor and quality of your drinking water. A genuine OE part, engineered in the USA, this filter will perform immediately after a quick and easy installation. Order the Omnipure Q5505 water filter by 4pm CST and we
| Package Qty | 1 |
|---|---|
| Used In Brands | Omnipure |
| Manufacturer's Id | Q5505 |
| UPC | 799932588655 |
| Advertised Size (in) | 10 x 2-1/2 |
| Actual Size (in) | 10 inches (length) x 2 1/2 inches (outside diameter) |
| Actual Size (cm) | 25.4 x 6.35 |
| Media | Polypropylene Depth Filtration |
| Primary Filter Media | Polypropylene |
| Filter Life (gallons) | 3,000 |
| Filter Life (liters) | 11,356.23 |
| Filter Life (months) | 12 months |
| Micron Rating (Nominal) | 5 |
| Maximum Operating Pressure (psi) | 125 |
| Operating Temperature (°F) | 35 - 100 |
| Operating Temperature (°C) | 1.7 - 37.8 |
| Flow Rate (gpm) | 0.5 |
| Flow Rate (lpm) | 1.893 |
| Additional Information | Fitting Size: This Q-Series filter is a replacement filter and must be used with an existing Q-Series head |
Reduced Contaminants
The OMNIPURE-Q5505 reduces the following contaminants:
- Bad Taste and Odor
- Chlorine Taste & Odor
- Sediment
The OMNIPURE-Q5505 is comparable with the following part numbers
| Q5505 |
Instructions
- Omnipure Q5505 water filters should be installed on cold water lines only
- Omnipure Q5505 water filters should not be used where the water is microbiologically unsafe
- Each time you change your filter, clean and apply silicone food grade lubricant (such as OR-LUBRICANT-LG or OR-LUBRICANT-SM) generously to both the small and large o-ring in the Q-Series Head
- It is recommended that you replace the Omnipure H-118 O-Ring every time you change your filter
- The H-118 O-Ring is the larger of the two o-rings in the Q-Series Head System
- If you do not replace the H-118 O-Ring, you may experience leaking because the o-ring adjusts to the shape of the old filter, which may be slightly different than the new filter
- The Omnipure H-011 O-Ring is the smaller o-ring in the Q-Series Head
Reset Instructions
Related Products
Omnipure Q5515 Water Filter
Price:$25.99 List Price Price:$36.99 Save 29%
