GE XWF Replacement Refrigerator Water Filter Cartridge

SKU
GE-XWF
Price: $59.99
Availability: In stock
Fits select GE French Door and Side-by-Side refrigerators manufactured after June 2018.
Choose a quantity
  • 1 Filter $59.99  
  • 2 Filters Price: $58.99 each
  • 3 Filters Price: $57.99 each
  • Filters out a vast array of contaminants
  • Provides great tasting filtered water in every glass
  • Provides a flow rate of up to .5 gallons per minute (gpm)
  • Meets NSF/ANSI Standards 42, 53, and 401
See more product details
If you are experiencing poor water taste and unpleasant odors from your refrigerators water you may be overdue for a replacement filter. The GE XWF replacement refrigerator water filter cartridge may be the filter you need to fit your select GE french door and side-by-side refrigerators manufactured after June 2018. The XWF uses carbon block filter media to provide a high degree of contaminant reduction and water enhancement. This filter supports a flow rate of up to .5 gallons per minute and has a filter life of about 6 months or 170 gallons depending on water quality and usage. Certified to meet NSF/ANSI standards 42, 53, and 401 you can drink easy knowing that your refrigerator water filter is providing lead reduction and protecting your drinking water from many other unwanted contaminants. With simple twist installation you can get the filtered water you need without the hassle of dealing with complex water filtration systems or time consuming plumbing.
Package Qty 1
Used In Brands GE
UPC 084691830740
Actual Size (in) 6 inches (Length) x 2.25 inches (Width) x 2 inches (Depth)
Actual Size (cm) 15.24 x 5.715 x 5.08
Media Carbon Block
Filter Life (gallons) 170
Filter Life (liters) 643.5
Filter Life (months) 6 months
Operating Pressure (psi) 25 - 120
Maximum Operating Pressure (psi) 120
Operating Temperature (°F) 33 - 100
Operating Temperature (°C) 0.6 - 37.8
Flow Rate (gpm) .5
Flow Rate (lpm) 1.89
Color White
Certifications NSF/ANSI Standard 42, NSF/ANSI Standard 53, NSF/ANSI Standard 401
Primary Filter Media Carbon Block

Installation Guide

Instructions

  1. Line up the arrow on the filter with the arrow on the filter cartridge holder.
  2. Gently push the top of the new filter up inside the holder.
  3. Slowly turn the filter to the right until it stops. DO NOT OVERTIGHTEN. The filter will move about a quarter turn or 90 degrees.
  4. Run water from the dispenser for 2 gallons or approximately 5 minutes to clear the system. (Water may spurt out and air bubbles may be visible during this process.)
  5. Press and hold the RESET WATER FILTER button (if applicable) on the dispenser for three seconds.

Reset Instructions

  1. Press and hold the RESET WATER FILTER button (if applicable) on the dispenser for three seconds.