EP-10 Pentek Comparable Whole House Water Filter by Tier1

SKU
TIER1-EP5-10
Price: $8.49
Availability: In stock
Fits into most industry standard 10-inch water filtration system housings
  • Ships fast!
  • Reduces sediment, chlorine taste and odor
  • Ensures you serve high quality water throughout your home!
See more product details
Moments after installation, the EP5-10 Tier1 carbon block water filter will go to work, reducing chlorine taste and odor from water through your entire home. This filter will also help to capture sediment and dirt particles 5 micron or larger, ensuring the water in your home remains the highest quality! Sized 9 7/8 x 2 1/2 inches. Order the replacement filters you need to ensure your system continues to reduce chlorine and sediment from your water by adding the EP5-10 Tier1 carbon block water filter to your cart today!

Experience the Tier1 Difference

Tier1 manufactures high-quality filtration and household products. We take creating and maintaining a healthy home seriously. Products must undergo rigorous testing and meet demanding quality expectations in order to earn the Tier1 badge. Every purchase is backed by the Tier1® Guarantee:

  • Guaranteed Fit
  • Guaranteed Quality
  • Guaranteed Price
Package Qty 1
Used In Brands Culligan, Pentek, Tier1
Manufacturer's Id EP5-10
UPC 799932612442
Advertised Size (in) 10 x 2-1/2
Actual Size (in) 9 7/8 inches (length) x 2 1/2 inches (outside diameter)
Actual Size (cm) 25.0825 x 6.35
Media Carbon Block
Primary Filter Media Activated Carbon Block
Filter Life (gallons) 6,000
Filter Life (liters) 22,712.5
Filter Life (months) 6 months
Micron Rating (Nominal) 5
Operating Temperature (°F) 40 - 180
Operating Temperature (°C) 4.4 - 82.2
Flow Rate (gpm) 1
Flow Rate (lpm) 3.78541
Color White
Warranty Guarantee Unconditional Product Guarantee for Life of the Product
Includes One 10 X 2.5 Inch Carbon Block Replacement Filter by Tier1
Primary Filter Media Activated Carbon Block

Reduced Contaminants

The TIER1-EP5-10 reduces the following contaminants:

  • Bad Taste and Odor
  • Chlorine Taste & Odor
  • Sand
  • Sediment
  • Silt

The TIER1-EP5-10 is comparable with the following part numbers

TIER1-EP5-10 EP5-10
42-34373 PENTEK EP-10
PENTEK 155531-43 MAXETW-975
155531-43

The TIER1-EP5-10 fits the following model numbers

3G-STANDARD-34-PR10
150574
All 10 x 2.5 inch standard filter housings

Instructions

  1. Turn off water supply. Press red pressure-relief button (if present)
  2. Unscrew housing. Remove large o-ring, wipe clean and set aside
  3. Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly
  4. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
  5. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
  6. NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
  7. Insert new filter cartridge
  8. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
  9. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation

Reset Instructions