Culligan RFC-BBS-D Whole House Water Filter Replacement Cartridge (Level 4)

SKU
CULLIGAN-RFC-BBS-D
Price: $32.99
Availability: In stock
Fits Culligan HD-950, and any brand of whole house water filter system that uses standard 9 3/4 x 4 1/2 filter cartridges
  • Ships fast!
  • Reduces chlorine, sediment and rust
  • Ensures you serve only the cleanest tasting water!
See more product details
Immediately after easy installation, the Culligan RFC-BBS-D whole house water filter replacement cartridge will go to work, significantly reducing potentially harmful impurities from your drinking water, including chlorine, sediment, rust and dirt. A genuine OE part from the manufacturer, this filter is designed to fit into whole house water filtration systems that use 9-3/4 inch x 4-1/2 inch cartridges. Order the Culligan RFC-BBS-D whole house water filter replacement cartridge online today.
Package Qty 1
Used In Brands Culligan
Manufacturer's Id RFC-BBS-D
UPC 033663005099
Advertised Size (in) 10 x 4-1/2
Actual Size (in) 9 3/4 inches (length) x 4 1/2 inches (outside diameter)
Actual Size (cm) 24.77 x 11.43
Media Radial Flow Granular Activated Carbon
Primary Filter Media Granular Activated Carbon
Materials of Construction End Caps: Polypropylene, Inner Wraps/Core: Polypropylene, Outer Shell: Polyethylene, Gasket: Buna-N
Filter Life (gallons) 10,000
Filter Life (liters) 37,854.12
Filter Life (months) 6 months
Micron Rating (Nominal) 25
Operating Pressure (psi) 30 - 100
Operating Temperature (°F) 40 - 125
Operating Temperature (°C) 4.4 - 51.7
Flow Rate (gpm) 2
Flow Rate (lpm) 7.571
Color White
Includes One 9-3/4 x 4-1/2 Inch Culligan / Ametek RFC-BB Water Filter
Primary Filter Media Granular Activated Carbon

Contaminants

Reduces the following contaminants:

  • Bad Taste and Odor
  • Chlorine Taste & Odor
  • Coarse Sand
  • Dirt
  • Fine Sand
  • Hard Scale
  • Rust and Corrosion
  • Sand
  • Sediment
  • Silt

The CULLIGAN-RFC-BBS-D is comparable with the following part numbers

WHCF-WHPCBB WHCFWHPCBB WHEF-WHPCBB WHEFWHPCBB
48169 155141 155141-27 155141-30
155141-43 155141-51 American Plumber 155141 American Plumber W10-PR
American Plumber W15-PR American Plumber WRC25HD Ametek RFC-BB Ametek RFC-BBS
Bruner RFC-BBS GE FXHSC GE FXHTC GE GXWH30C
GE GXWH35F HD-950 Kleen Plus RFC-BBS OmniFilter BF6
OmniFilter BF7 OmniFilter T06 Pentair RFC-BBS Pentek 155141-43
Pentek RFC-BB Pentek RFC-BBS Plymouth RFC-BBS RFC-BB
RFC-BBS RFC-BBSA RFC-BBSA-D RFC-BBS-D
TO8 TO8-2-01 TO8-2-02 TO8-2-05
TO8-R-05 US Filter RFC-BB US Filter RFC-BBS W5CBHD
WRC25HD 1020705

Instructions

  1. Turn off water supply. Press red pressure-relief button (if present).
  2. Unscrew housing. Remove large o-ring, wipe clean and set aside.
  3. Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly.
  4. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly.
  5. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove.
  6. NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove.
  7. Insert new filter cartridge.
  8. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge.
  9. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation.

Reset Instructions