Whirlpool W10413645A EveryDrop EDR2RXD1 Comparable Refrigerator Water Filter Replacement by AquaFresh

SKU
AQUAFRESH-WF645
Price: $29.99
Availability: Out of stock
  • Installs quickly and easily
  • Tested to ensure performance
  • Reduces contaminants ranging from chlorine to turbidity
  • Provides great tasting drinking water and ice directly from your refrigerator
See more product details
The Whirlpool W10413645A EveryDrop EDR2RXD1 Comparable Refrigerator Water Filter Replacement by AquaFresh is an ideal replacement for the Whirlpool W10413645A/EveryDrop EDR2RXD1. Built for performance, the filter reduces contaminants commonly found in drinking water, such as chlorine taste and odor, dirt, turbidity and more, the filter leaves you with clean, great-tasting drinking water. Each filter lasts for up to six months, or 200 gallons, depending on water quality. Purchase with the confidence of knowing the Whirlpool W10413645A EveryDrop EDR2RXD1 Comparable Refrigerator Water Filter Replacement by AquaFresh has earned IAPMO Research and Testing's Water Quality Platinum Seal. Order today!
Package Qty 1
Used In Brands Whirlpool
Manufacturer's Id WF645
UPC 850642007284
Actual Size (in) 7 1/2 inches (length) x 2 inches (outside diameter)
Filter Life (gallons) 200
Filter Life (liters) 757.082
Filter Life (months) 6 months
Micron Rating (Nominal) 0.5
Operating Pressure (psi) 30 - 125
Maximum Operating Pressure (psi) 125
Operating Temperature (°F) 38 - 100
Operating Temperature (°C) 3.3 - 37.8
Flow Rate (gpm) 0.5
Color White
Certifications Independently Tested against NSF/ANSI Standard 42
Warranty Guarantee 30 Day Limited Warranty

Contaminants

Reduces the following contaminants:

  • Chlorine Taste & Odor
  • Rust and Corrosion
  • Sand
  • Sediment
  • Silt
  • Turbidity

The AQUAFRESH-WF645 is comparable with the following part numbers

W10413645A

The AQUAFRESH-WF645 fits the following model numbers

KFIS29BBMS WRF989SDAM
WRS325FDAM WRF736SDAM
WRF989SDAB WRF989SDAE
WRF989SDAF WRF989SDAH
WRF989SDAW

Instructions

  1. Note: Filter must be pushed firmly into receiver and turned until filter is locked in place. If filter is not locked correctly, water will not flow.
  2. DO NOT use any tools to install this filter
  3. Twist the old filter a quarter-turn counterclockwise
  4. Pull the filter straight down and discard (don't worry, the water will shut off automatically)
  5. Remove the reusable color-keyed knob from the end
  6. Slide the knob onto the end of the new filter
  7. Push the new filter into the fridge until it stops and twist the filter a quarter-turn clockwise
  8. Reset your change filter light (if your fridge has one)
  9. Flush filter with 3-4 gallons of with water until water runs clear. Some noise is not uncommon as air is purged from the system.
  10. If filter sets for several days without use, flush a quart of water through the filter to remove stale water from refrigerator water lines

Reset Instructions