We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Tier1 AP117 Comparable GAC Water Filter Replacement
SKU
TIER1-GAC-P117
$11.29 List Price $16.99 Save 33%
Availability: In Stock
Fits in housings that accept 10 x 2-1/2 inch replacement filters
The solid core of the filter may inhibit it from fitting in some housing caps and sump posts.
- Reduces chlorine, taste and odor, as well as sediment
- Universal size for a variety of filter systems
- Great low cost alternative
- Backed by a product guarantee
› See more product details
- Reduces chlorine, taste and odor, as well as sediment
- Universal size for a variety of filter systems
- Great low cost alternative
- Backed by a product guarantee
The Tier1 AP117 Comparable GAC Water Filter Replacement is a great low-cost alternative. Not only will you save, but you will also have peace of mind knowing that this product is backed by an Unconditional Product Guarantee for the Life of the Product. The Tier1 AP117 Comparable GAC Water Filter Replacement is a sediment filter sized at 10 inches by 2-1/2 inches. This universal size makes the product ideal for quick and easy filter changes. If your water is contaminated with pesky sediment, as well as chlorine resulting in bad taste and odor, the granular activated media is efficient at reducing a multitude of contaminants at once.
Experience the Tier1 Difference
Tier1 manufactures high-quality filtration and household products. We take creating and maintaining a healthy home seriously. Products must undergo rigorous testing and meet demanding quality expectations in order to earn the Tier1 badge. Every purchase is backed by the Tier1® Guarantee:
- Guaranteed Fit
- Guaranteed Quality
- Guaranteed Price
Reduced Contaminants
The TIER1-GAC-P117 reduces the following contaminants:
- Bad Taste and Odor
- Chlorine Taste & Odor
- Sand
Instructions
- Turn off the water supply. Press the red pressure-relief button (if present).
- Unscrew housing. Remove large o-ring, wipe clean, and set aside.
- Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly.
- Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in the groove.
NOTE: this step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove. - Insert the new filter cartridge.
- Screw housing onto the cap and hand-tighten. do not overtighten. Make sure cap standpipe slips into cartridge.
- Turn on the water supply. Press the pressure-relief button (if present). check for leaks before leaving installation.