PUR RF-9999 3-Stage Faucet Filter Replacement Cartridge

The PUR Ultimate 3-Stage Faucet Filter RF-9999 is a New and Improved filter that replaces the Obsolete PUR RF-4050.

The PUR RF-9999 fits ALL PUR faucet mounted filter systems including:

• Horizontal & Vertical styles
• "Plus" & "Ultimate"
• All colors and finishes

The RF-9999 filter also fits the new Delta Simply PUR Single Handle Filtration System.

PUR 3-Stage Filtration Process:

• Stage 1 - Cleans the water: Water is passed through a sediment wrap to reduce dirt, rust, sand, and turbidity.
• Stage 2 - Makes the water healthy: Water is passed through an activated carbon filter to reduce heavy metals (Lead, Mercury), Chlorine and Chlorination By-Products (TTHMs), Microbial Cysts (Cryptosporidium, Giardia), Agricultural Pollutants (such as pesticides), Industrial Pollutants (such as gasoline additives and asbestos)
• Stage 3 - Improves taste: Water is passed through a bed of minerals for a crisp, refreshing taste.

The RF-9999 Filter removes the following impurities from your drinking water:

• 99.4% of Lead at pH 6.5
• 96.0% of Lead at pH 8.3
• 92.0% of Mercury at pH 6.6
• 85.0% of Mercury at pH 8.4
• 97.4% of Benzene
• 99.9% of o-Dichlorobenzene
• 99.9% of Ethylbenzene
• 99.9% of Monochlorobenzene
• 96.9% of Tetrachloroethene
• 96.4% of MTBE
• 96.9% of Carbon Tetrachloride
• 99.9% of Toluene
• 99.8% of Trichloroethene
• 98.5% of TTHM
• 99.4% of Asbestos
• 99.9% of Cysts
• 99.0% of 2,4-D
• 99.4% of 2,4,5-TP (Silvex)
• 99.4% of Alachlor
• 94.6% of Atrazine
• 90.4% of Carbofuran
• 97.5% of Chlordane
• 99.5% of Endrin
• 98.8% of Heptachlor
• 92.0% of Lindane
• 98.8% of Methoxychlor
• 98.8% of Simazine
• 99.9% of Styrene
• 92.5% of Toxaphene
• 98.0% of Chlorine
• 99.4% of Turbidity
• 99.0% of Particulates (Class I)

The RF9999 cartridge does not remove Fluoride

This filter is tested and certified by NSF International to meet or exceed NSF/ANSI Standards 42 & 53

The PUR Faucet Filter RF-9999 will filter up to 100 gallons of water, and should last 2-3 months (depending on usage).

Usage Tips:

1. Remember to flush your new filter by running cold water through it for 5 minutes.
2. Run cold water through it for 5 seconds, prior to each use, to activate the filter.
3. In order to get the most from your faucet filter:
• Remember to put it in bypass mode when you’re not planning to drink the water
• Never run hot water through the filter, as it will reduce it’s effectiveness, and may even cause damage