SF100 OmniFilter Shower Soft Water Filter
The OmniFilter Shower Soft SF100 Shower Water Filter installs easily in any standard shower, and works with nearly all shower heads.
- Installs in less than 5 minutes - no tools required
- Removes Chlorine, Sediment, and Rust for up to a year
- Say goodbye to dry skin and stop smelling like you just climbed out of the pool
- Even reduces the build-up of soap scum - so you'll spend less time cleaning the shower
The Omni SF-100 includes everything you need to install the filter in your shower.
You won't need any special fittings, and you definitely won't need a plumber. Installation takes less than 5 minutes.
Installation Instructions:
- Unscrew your existing showerhead by rotating it counterclockwise until it's free from the shower arm
- Apply a few wraps of teflon tape* to the threads on the shower arm
- Screw the shower filter onto the shower arm - tightening it just enough (by hand) to prevent leaks
- Apply a few wraps of teflon tape* to the threads on the shower filter
- Screw the showerhead onto the shower filter - again, tightening it just enough (by hand) to prevent leaks
* Teflon tape isn't required, but it may make for a more trouble free, and more leakproof connection.
| Filter Name / Part Number: |
OmniFilter Shower Soft SF100 |
| Filter Type: |
Granular Carbon with Bacteriostatic Media |
| Filter Size: |
2.5 inches diameter x 5 inches long (including molded in fittings) |
| Micron Rating: |
10 microns |
| Flow Rate: |
1 gallon per minute |
| Filter Life: |
30,000 gallons or 12 months (based on typical shower usage for a family of 4) |
| Removes: |
99% of Chlorine, Sediment, and Rust |
Product CodeSF100 Product UPC047087201296 Similar Products
|