GE SmartWater MWF Refrigerator Filter Replacement Cartridge
GE MWF SmartWater Refrigerator Water Filter detail
What does it fit?
does it remove?
should I change it?
The GE SmartWater MWF Cartridge fits GE and Hotpoint refrigerators with a round white plastic filter, typically mounted inside the refrigerator at the rear of the compartment - above the top shelf.
Trying to replace an old metal canister filter?
The MWF Filter plus a GE filter adapter can be used to replace these old metal canister filters:
The MWF filter plus GE filter adapter is about 1 inch taller than the old style metal canister filters so if you are replacing a metal canister filter, and your top refrigerator shelf is set pretty high (close to the bottom of the filter) then you may want to buy the GE MXRC filter instead.
The SmartWater MWF Filter replaces these older filter part numbers:
The MWF Filter removes the following impurities from your drinking water:
As with all built-in refrigerator water filters, the MWF does not remove Fluoride
The MWF cartridge is tested and certified by NSF International to meet or exceed NSF/ANSI Standards 42 & 53
Rated Flow Rate: 0.5 gallons per minute at 60 psi
The SmartWater Filter MWF should be replaced every 6 months or when the "change filter" light comes on - whichever comes first.
Installing your new water filter:
Resetting your "change filter" light:
Country of Origin