Electrolux EAFWF01 Pure Advantage Refrigerator Water/Air Filter Combo

The PureAdvantage EAFWF01 Refrigerator Water / Air Filter Combo fits all Electrolux refrigerators except Electrolux ICON models.

This handy combo pack includes one EWF01 water filter and one EAFCBF air filter.

The EWF01 Water Filter replaces these filter part numbers:

• 218732316, 241932301, EWF01, EAFWF01, EWF2CB02, FC-300, FC300, Pure Advantage NGFC 2000

The EAFCBF Air Filter replaces these filter part numbers:

• EAFCBF, 241754001

The EAFCBF Air Filter helps eliminate odors, control humidity, and keep food fresher longer. It also saves you money by reducing energy consumption.

The EWF01 Water Filter removes the following impurities from your drinking water:

• 99.30% of Lead
• 96.60% of Mercury
• 99.99% of Cysts
• 97.30% of Alachlor
• 94.60% of Atrazine
• 98.90% of Lindane
• 93.20% of Toxaphene
• 99.90% of 2,4-D
• 97.40% of Chlorine
• 97.80% of Turbidity
• 99.10% of Particulates (Class I)

As with all built-in refrigerator water filters, the Pure Advantage EWF01 / FC300 does not remove Fluoride

The EWF01 cartridge is tested and certified by NSF International to meet or exceed NSF/ANSI Standards 42 & 53

The Pure Advantage Refrigerator Ice & Water Filter EWF01 should be replaced every 6 months or when the "change filter" light comes on - whichever comes first.

Installing your new water filter:

1. Turn off the icemaker (using the power switch)
2. Press the button just below the filter to release it
3. Slide the old filter straight out and discard (don't worry, the water will shut off automatically)
4. Push the new filter straight in until it "clicks" into place
5. Turn the ice maker back on
6. Reset your "change filter" light

Resetting your "change filter" light:

• Press and hold the Filter Status button (on the dispenser) for 3 seconds - until the display changes from "Replace" to "Good"

The Pure Advantage Refrigerator Air Filter EAFCBF should be replaced every 6 months.

Installing your new air filter couldn't be easier:

1. Pull the air filter housing straight out
2. Remove the old filter from the housing and discard
3. Remove the cardboard "windows" from the new filter
4. Insert the new filter into the filter housing
5. Slide the filter housing back into the fridge
6. Press and hold the Air Filter Reset button on your control panel for 3 seconds - until the display changes from "Replace" to "Good"