Brita MYRF-100 Refrigerator Water Filter (Compatible with PuriClean UKF7003AXX)

From the world's #1 brand in household water filtration, the Brita MYRF-100 Replacement Filter fits all refrigerators that use the Maytag PuriClean UKF7003AXX water filter.

The MYRF-100 is guaranteed by Brita to fit AND make your water taste better. What more could you ask for?

The Brita MYRF-100 removes the following impurities from your drinking water:

• Chlorine
• Particulates (Class I)

As with all built-in refrigerator water filters, the MYRF-100 does not remove Fluoride

The Brita MYRF-100 filter is tested and certified by the Water Quality Association (WQA) to meet or exceed NSF/ANSI Standard 42

Does the Brita MYRF-100 really only remove Chlorine and Particulates?

Since Brita didn't manufacture your refrigerator, they aren't allowed to make claims about all of the contaminants that the MYRF-100 will remove once installed in your fridge.

So, what exactly will the Brita MYRF-100 filter remove from my water?

While we can't say exactly which contaminants it removes, the MYRF-100 uses the same Brita Advanced Carbon Block technology used in Brita faucet filters.

A typical Brita Faucet filter removes the following:

• 98.70% of Lead at pH 6.5
• 99.30% of Lead at pH 8.4
• 96.90% of Benzene
• 99.90% of Chlorobenzene
• 99.90% of o-Dichlorobenzene
• 99.90% of Ethylbenzene
• 97.00% of Tetrachloroethene
• 96.9% of Carbon Tetrachloride
• 95.00% of Heptachlor Epoxide
• 99.90% of Toluene
• 99.50% of Trichloroethene
• 98.90% of TTHM
• 99.80% of VOCs
• 99.90% of Asbestos
• 99.99% of Cysts
• 99.70% of 2,4-D
• 98.80% of Alachlor
• 76.20% of Atrazine
• 90.60% of Carbofuran
• 96.70% of Carbon Tetrachloride
• 98.00% of Chlordane
• 99.00% of Endrin
• 98.90% of Lindane
• 97.00% of Methoxychlor
• 98.00% of Simazine
• 99.90% of Styrene
• 87.50% of Toxaphene
• 99.00% of Chlorine
• 99.10% of Turbidity
• 99.90% of Particulates (Class I)

The MYRF-100 Refrigerator Water Filter should be replaced every 6 months or when the "change filter" light comes on - whichever comes first.

Installing your new water filter:

1. Twist the old filter a quarter-turn counterclockwise
2. Pull the filter straight down and discard (don't worry, the water will shut off automatically)
3. Push the new filter up into the fridge until it stops
4. Twist the filter a quarter-turn clockwise
5. Run water through the dispenser for 3 minutes
6. Reset your "change filter" light (if your fridge has one)

Resetting your "change filter" light:

• Press and hold the lock and light buttons (lock and water on newer fridges) on the dispenser for about 4 seconds, until the indicator light blinks.

These filters are all interchangeable, so you can use any one in your fridge...

	Aqua Fresh WF288	Brita MYRF-100	Maytag UKF7003AXX
The FridgeFilters.com Performance Rating is based on an in-depth analysis of the filter specifications and feedback from thousands of customers. Generally speaking, a filter with more stars will produce better tasting, healthier water. Performance factors include: Flow rate, capacity (filter life), micron rating, etc. Filtering material - carbon block, granular carbon, pleated paper, etc. The type of contaminants removed by the filter - Chlorine, Lead, Cysts, etc. The number of different contaminants removed The percentage reduction of each contaminant Performance
The FridgeFilters.com Quality Rating is based on an in-depth analysis of the filter materials, construction, packaging, and certification. Generally speaking, a filter with more stars is NSF certified, is made of high-grade plastic with tight seams, and has no sharp edges. The filter label and box are well designed, and include color photos to aid in installation. Quality factors include: Materials used to make the housing Tightness of seams, quality of o-rings, etc. Certification by an independent agency - ANSI, NSF, WQA, etc. Length of manufacturers warranty, Good Housekeeping seal of approval, etc. Detailed installation instructions on the filter label, box, or both Country of manufacture - USA, Mexico, China, etc. Quality
In Stock
Price	$32.99	$33.99	$38.99
	Every 6 Months	Every 6 Months	Every 6 Months

"I changed my water filter, but my filter light is still red... what gives?"

On most fridges the water filter light is nothing more than a fancy “egg timer” set to go off after six months. That’s because the water filter is made from activated carbon which only absorbs contaminants for about 6 months - think of it as a charcoal sponge. Once the "sponge" is full, the filter just lets water & contaminants pass right through until it eventually clogs up with tiny particles of sand, sediment, and rust.

Merely inserting your brand-spanking-new water filter will not reset the light on any fridge, so you'll need to manually reset your filter change indicator light. Not sure how to reset the light... here's how - filter light reset instructions.

Is your water safe to drink?

WaterSafe All-In-One Home Drinking Water Test

Click for more info

Item:	Water Safe All In One Test Kit
	Do-it-yourself, in-home drinking water test for: Lead, Bacteria, Pesticides (Atrazine & Simazine), Chlorine, Nitrates / Nitrites, Hardness, and pH.
Our Price:	$19.95
Quantity:
Order by 1 p.m. Eastern for Same Day Shipping! U.S. Standard Shipping is $3.99 OR FREE ON ORDERS OVER $75

Got a Stinky Fridge that baking soda won’t fix?

Gonzo Refrigerator Odor Eliminator (8 oz)

Click for more info

Item:	Gonzo Refrigerator Odor Eliminator
	Acts Like a Magnet to Trap Odors and Keep Your Refrigerator Smelling Clean & Fresh Works great in your refrigerator or freezer - even better than baking soda Prevents odors from transferring from one food to another Non-toxic volcanic minerals are safe for you and your pets Lasts up to 10 months and it's rechargeable - just place the odor eliminator in direct sunlight for 6 hours every 8-10 months
Our Price:	$7.99
Quantity:
Order by 1 p.m. Eastern for Same Day Shipping! U.S. Standard Shipping is $3.99 OR FREE ON ORDERS OVER $75