AP810 Aqua-Pure Whole House Replacement Water Filter

What does it fit?

Filter
Performance

How often
should I change it?

Need an O-ring
or filter wrench?

The Aqua-Pure AP810 water filter is the replacement cartridge for the following Aqua Pure water filter systems:

The Aqua Pure AP810 water filter replaces the following filter part numbers:

Pressure:	100 psi
Filter Size:	9 3/4 inches (length) x 4 1/2 inches (diamter)
Temperature:	40 - 100 degrees Fahrenheit
Filter Life:	4 months
Flow Rate:	28 gallons per minute
Micron Rating:	5 microns
Removes:	Rust, and Sediment The AP810 filter does not remove Fluoride

The Aqua Pure AP810 replacement filter cartridge should be replaced every 4 months.

Installing your new filter:

Turn off the water supply to the unit
Press the red button on the top of the unit to relieve extra pressure
Slide your Aqua-Pure 68900-33 sump wrench upward around the housing and turn left to unscrew
Remove the housing once it's loose and wipe it down
Remove the old filter and replace it with the new one
Lubricate the Aqua-Pure 68898-32 o-ring with some silicone grease
Replace the housing and tighten with the wrench (be careful not to overtighten)
Open the valves to restore water pressure

Prevent leaks by replacing your O-Ring every 3rd filter change�

Replace your filters with ease using this handy wrench�

Replace your filters with ease using this handy wrench�

Product Code
AQUAPURE-AP810

Product UPC
016145810107